Scan the QR code
Applicable wire range:AWG#26-AWG#16
Stripping length:Front end 0.5-8.0mm,Back end 0.1-10.0mm
Processing length:Rubber in the middle 51mm-99999mm (can be shorter after modification)
1. The equipment mainly uses branded original parts to complete functions such as wire cutting, stripping, and terminal crimping, with precise movements and stable performance.
2. The host has a built-in four-wheel synchronous wire feeder to maintain constant wire tension; it has an automatic terminal strip cutting device.
3. The host is controlled by a motion control card, and the parameters are set on the Chinese and English touch screen, with short adjustment time and easy operation.
4. Suitable for horizontal and direct OTP terminal molds.
5. Energy-saving, space-saving, and environmentally friendly equipment.
EW-8870
Applicable wire range
AWG#26-AWG#16
Processing capacity
Wire length 50-100mm about 1300 sets/hour, special wire (ultra-fine soft wire) about 1000 sets/hour
Cutting accuracy
Wire length below 100mm error 0.2+(wire length x0.002), wire length above 100mm error 0.5+(wire length x0.002)
Processing length
Rubber in the middle 51mm-99999mm (can be shorter after modification)
Stripping length
Front end 0.5-8.0mm Back end 0.1-10.0mm
Cutter depth
Max. adjustment 5.50mm, resolution 0.01mm
Detection device
Low air pressure, wire presence or absence, crimping abnormality, wire entry abnormality
Power supply
Single phase AC200V~242V 50/60Hz 10A
Compressed air
0.5 MPa(5kgf/cm2) clean and dry gas
Machine dimensions
Machine weight
About 600KG
Pedal control
N/A
