| Model | EW-9010 | |||
| Injection injection | Screw Diameter | mm | 20 25 30 | |
| Injection Pressure | kg/cm² | 2256 1747 1213 | ||
| Theoretical Shot Volume | cm³ | 38 56 85 | ||
| Max Shot W eight | g | 34 50 72 | ||
| Injection Rate | cm3/sec | 22 35 50 | ||
| Screw Stroke | mm | 100 | ||
| Screw Speed | rpm | 0-205 | ||
| Nozzle Contact Force | tons | 2 | ||
| Nozzle Stroke | mm | 140 | ||
| Number of Temperature Control | - | 3 | ||
| Hopper Capacity | L | 20 | ||
| Clamping system | Clamping Force | tons | 40 | |
| Opening Force | tons | 6.5 | ||
| Platen Size | mm | 545x390 | ||
| Distance Between Tie Bar | mm | 370x215 | ||
| Min Mold Height | mm | 160/100 | ||
| Opening Stroke | mm | 180 | ||
| Max Open Daylight | mm | 340/280 | ||
| Ejector Force | tons | 1.3 | ||
| Ejector Stroke | mm | 45/95 | ||
| Sliding system | Slide Stroke | mm | 350 | |
| Max Mold Weight | kg | 90 | ||
| Station Clearance | mm | +0.02 | ||
| Oil pressure system | Max Hydraulic Pressure | kg/cm2 | 140 | |
| Pump Output | L /min | 26 | ||
| Oil Reservior Capacity | L | 100 | ||
| Cooling Water Consumption | /hr | 400-600 | ||
| Pump Moter Power | KW | 3.5 | ||
| Barrel Heating Power | kw | 2.7 | ||
| Total Power | kw | 6.2 | ||
| Other | Machine Weight | tons | 1.3 | |
| Machine Dimension | m | 1.59*1.3*22 | ||
| Shipping w eight | tons | 1.4 | ||
| Shipping Measurement | mm | 1.8*1.5*2.3 | ||
Copyright (c) 2014-2021 WENZHOU EAST WORLD AUTOMATION EQUIPMENT CO.,LTD All Rights Reserved.
