1. The equipment mainly uses branded original parts to complete functions such as wire cutting, stripping, and terminal crimping, with precise movements and stable performance.
2. The host has a built-in four-wheel synchronous wire feeder to maintain constant wire tension; it has an automatic terminal strip cutting device.
3. The host is controlled by a motion control card, and the parameters are set on the Chinese and English touch screen, with short adjustment time and easy operation.
4. Suitable for horizontal and direct OTP terminal molds.
5. Energy-saving, space-saving, and environmentally friendly equipment.
|
EW-8870 |
|
|
Applicable wire range |
AWG#26-AWG#16 |
|
Processing capacity |
Wire length 50-100mm about 1300 sets/hour, special wire (ultra-fine soft wire) about 1000 sets/hour |
|
Cutting accuracy |
Wire length below 100mm error 0.2+(wire length x0.002), wire length above 100mm error 0.5+(wire length x0.002) |
|
Processing length |
Rubber in the middle 51mm-99999mm (can be shorter after modification) |
|
Stripping length |
Front end 0.5-8.0mm Back end 0.1-10.0mm |
|
Cutter depth |
Max. adjustment 5.50mm, resolution 0.01mm |
|
Detection device |
Low air pressure, wire presence or absence, crimping abnormality, wire entry abnormality |
|
Power supply |
Single phase AC200V~242V 50/60Hz 10A |
|
Compressed air |
0.5 MPa(5kgf/cm2) clean and dry gas |
|
Machine dimensions |
|
|
Machine weight |
About 600KG |
|
Pedal control |
N/A |
Copyright (c) 2014-2021 WENZHOU EAST WORLD AUTOMATION EQUIPMENT CO.,LTD All Rights Reserved.
