· Mainly composed of brand components, which can complete the functions of cutting wire, peeling, terminal pressing, etc.,
· Built-in four-wheel synchronous wire feeder, constant wire tension; With automatic cutting terminal material tape device.
· Host motion control card control, Chinese and English touch screen parameter setting, adjustment time is short, easy to operate.
|
Model |
EW-8875 |
|
Applicable wire range |
AWG22-AWG16 |
|
Stripping length |
Front: 0.5-8mm; Rear: 0.1-10mm |
|
Cut precision |
±(0.5+0.002*L) mm, L=cut length |
|
Cutting length |
76-9999mm |
|
Capacity |
800 sets/hour(L=80-150mm) |
|
Crimping stroke |
30mm/ 40mm |
|
Air pressure |
0.5Mpa |
|
Detection |
Wire run out, low air pressure, terminate error(Crimping force monitor is for optional) |
|
Power |
220V/110V/50/60HZ |
|
Dimension |
800*2600*1800mm |
|
Weight |
900Kg |
|
Pedal |
N/A |
Copyright (c) 2014-2021 WENZHOU EAST WORLD AUTOMATION EQUIPMENT CO.,LTD All Rights Reserved.
