1. This machine is a double-head fully automatic terminal machine, and can automatically insert the rubber shell sheath, which greatly improves the processing efficiency of terminal insertion and sheath insertion! Users can choose single-head sheath insertion or double-head sheath insertion function according to their needs, and the sheath rubber shell is automatically fed through the vibration plate.
2. When processing long wires, you can choose an automatic wire collection conveyor belt to ensure that the wire can be placed straight and neatly in the receiving tray after processing. You can also choose a terminal pressure real-time management system, which can automatically alarm and shut down when the pressure is abnormal, so you can guarantee 100% yield.
|
Model |
EW-8215 |
|
Wire range |
1.0-4.0mm2/AWG1015-12#-24# |
|
Cut length |
90mm-9999mm (800mm and above need to be equipped with a conveyor belt) |
|
Strip length |
0-15mm |
|
Crimp force |
2.0T-3.0T |
|
Crimp stroke |
30mm |
|
Applicable mold |
Universal OTP mold |
|
Detection device |
Air pressure detection, wire detection, crimping terminal detection, sheath detection |
|
Control mode |
Microcontroller control |
|
Function |
Wire cutting, single (double) end stripping, single (double) end crimping, single (double) end sheathing and pulling in place |
|
Production capacity |
1800-2200 pcs/h (depending on the terminal of the wire) (this efficiency is only applicable when the machine is working continuously without stopping) |
|
Compressed air |
0.5MPa-0.8MPa (170N/min) |
|
Power supply |
Single-phase AC220V 50/60Hz |
|
Dimensions |
Length 1700*width 900*height 1860 (mm) |
|
Main component brand |
Taiwan Hiwin screw rod, Taiwan Airtac cylinder solenoid valve, Leadshine servo motor, Dacheng slide rail, Japanese imported bearings. |
|
Pedal control |
N/A |
Copyright (c) 2014-2021 WENZHOU EAST WORLD AUTOMATION EQUIPMENT CO.,LTD All Rights Reserved.
