Fully Automatic Wire Cutting Stripping Two wires Three ends Terminal Crimping Machine adopts procedural control interface with touch screen LCD display,it has operate system in Chinese and English, easy to operate and stable performance.Fast send wire ,cut wire,strip wire and crimp the terminals,high precision, fast speed,front and rear swing arms are both controlled by servo,and ultra low noise,more stable.The length of sending/cutting/stripping wire, and the delay time of crimping,which all can be accomplished by digital configuration.
|
Model |
EW-21C |
|
Applicable wire range |
AWG34-AWG14 |
|
Stripping length |
Side A:0-10mm, Side B:0-13mm |
|
Cut precision |
±(0.5+0.002*L) mm, L=cut length |
|
Cutting length |
50-9999mm |
|
Capacity |
3100pcs/hour(L=200mm) |
|
Crimping force |
2.0T |
|
Air pressure |
0.6-0.8Mpa |
|
Function |
Two wire both ends/ one end crimping/ Two wire crimp into on e terminal |
|
Detection |
Wire run out, low air pressure, terminate error(Crimping force monitor is for optional) |
|
Power /Power Rating |
220V/110V/50/60HZ /3000W |
|
Display language |
Chinese/English |
|
Dimension |
1600*800*1550mm |
|
Weight |
800Kg |
|
Foot pedal start |
N/A |
Copyright (c) 2014-2021 WENZHOU EAST WORLD AUTOMATION EQUIPMENT CO.,LTD All Rights Reserved.
