1. Vibrating plate automatically feeds bulk rubber shell;
2. Simple design, easy operation, easy debugging;
3. Simple replacement product specifications, short time;
4. Universal wire feeder with reel line;
5. Each P can be freely set wire cutting length and stripping length;
6. Automatic equipment selection, isolation process defective products;
7. Check whether the terminal is inserted 100% and then pulled out.
|
Model |
EW-8140 |
|
Applicable wire range |
AWG16-AWG26 or AWG24-AWG30 |
|
Stripping length |
A: 0.1-6.0mm B: 0.1-10.0mm |
|
Tinning length |
1-10 mm |
|
Cutting length |
1000mm≧L≧40mm |
|
Capacity |
1800-2000PIN/H |
|
Crimping force |
2.0T |
|
Twisting length |
3-10mm |
|
Air pressure |
0.6-0.8Mpa |
|
Wire color |
2-8 color wires(must be the same specification） |
|
Max. Pins |
Single row 20 pins, maximum 3 rows |
|
Shell size |
MAX:40*25*20 MIN:5*6*3 Spacing 1.0-4.2mm |
|
Power |
220V/110V/50/60HZ |
|
Detection device |
Low air pressure ,Wire run-out, Wire overload, Terminal run-out,Terminal overload, Crimp error, Insertion error |
|
Dimension |
2340L*1300W*2120H |
|
Weight |
520Kg |
|
Options |
CCD visual Inspection; CFM |
Copyright (c) 2014-2021 WENZHOU EAST WORLD AUTOMATION EQUIPMENT CO.,LTD All Rights Reserved.
