1. This is a fully automatic heat shrinkable tube terminal machine, which inteqrates functions such as wire cutting, wire striping double-head crimping terminals, and insertion into heat-shrinkable tubes.

2. The coil-mounted heat-shrinkable tube can be cut to a fixed length. After the wire is cut and stripped, the heat-shrinkable tube is inserted into the wire. 

3. After the terminal crimping is completed, the heat-shrinkable tube is automatically pushed onto the terminal, and the heat-shrinkable tube is heated and shrunk in place by the automatic heating device. in addition, laser marking or coding functions can be selected to realize automatic printing of characters on heat shrinkable tubes.

Model EW-8070-1

Applicable wire range AWG22-AWG14

Stripping length Front: 0.5-8mm; Rear: 0.1-10mm

Cut precision ±(0.5+0.002*L) mm, L=cut length

Cutting length 86-9999mm

Capacity 2000pcs/hour(L=80-100mm)

Crimping force 2.0T

Applicators 30mm or 40mm strokes for optional

Air pressure 0.5-0.7Mpa

Detection Wire run out, low air pressure, terminate error(Crimping force monitor is for optional)

Power 220V/110V/50/60HZ

Cutting depth The maximum adjustment is 5.50mm and the resolution is 0.01mm.

Shrinkage tube size 3.0-6.0mm Dia(12-18mm length)

Dimension 800*1400*1800mm

Weight 500Kg

Power cord plug European, USA, Chinese plug