1. Vibrating plate automatically feeds bulk rubber shell;
2. Simple design, easy operation, easy debugging;
3. Simple replacement product specifications, short time;
4. Universal wire feeder with reel line;
5. Each P can be freely set wire cutting length and stripping length;
6. Automatic equipment selection, isolation process defective products;
7. Check whether the terminal is inserted 100% and then pulled out.
Model |
EW-8295 |
Applicable wire range |
AWG18-AWG30 |
Stripping length |
A: 0.1-6.0mm B: 0.1-10.0mm |
Tinning length |
1-10 mm |
Cutting length |
40-780mm |
Capacity |
1300pcs/hour |
Crimping force |
2.0T |
Terminal length |
30mm |
Air pressure |
0.6-0.8Mpa |
Wire color |
2-8 color wires(must be the same specification) |
Max. Pins |
Single row 20 pins, maximum 3 rows |
Shell size |
MAX:40*25*20 MIN:5*6*3 Spacing 1.0-4.2mm |
Power |
220V/110V/50/60HZ |
Detection device |
Low air pressure ,Wire run-out, Wire overload, Terminal run-out,Terminal overload, Crimp error, Insertion error |
Dimension |
2340*1300*2120mm |
Weight |
520Kg |
Options |
CCD visual Inspection; CFM |
Copyright (c) 2014-2021 WENZHOU EAST WORLD AUTOMATION EQUIPMENT CO.,LTD All Rights Reserved.